Small Work Supports
Hydraulically-locked Jergens Work Supports differ from clamps
and vises in that they do not actually exert force upon the
workpiece. Rather, they are used to support the part being
machined, offering resistance to any clamping forces acting counter
to the direction of travel of the piston.
In a typical application, a large, thin casting is located on
several tooling point pads for positioning. Work Supports will
automatically adjust to support the delicate sections of the
casting. When hydraulic pressure is applied, the floating pistons
within the Work Support are locked in position and resist any
downward movement exerted on the casting. After the casting is
removed, the floating pistons return to their fully-raised
position.
Dimensions
| Part Number | Price | Port K | Minimum Operating Pressure Psi | Maximum Operating Pressure Psi | Support to Pressure Ratio | Maximum Support Capacity (lbs) | Plunger Spring Force +Start | Plunger Spring Force +Finish | Thru A (In) | Tap C | Weight (lbs) | B (In) | F (In) | G (In) | H (In) | I (In) | J (In) | L (In) | M (In) | N (In) | Tapped A (In) | Minimum E (In) | Maximum E (In) | Operating Pressure (cu. in.) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 60513 | £327.20 | 9/16-18 | 500 | 3000 | 1.6:1 | 5000 | 2 | 7 | 1/4 | 1/4-20 | 2 | 0.5 | 0.49 | 2.36 | 1.12 | 0.81 | 1.75 | 0.5 | 1.5 | 2 | 5/16-24 | 2.45 | 2.7 | 0.04 | £327.20Add to basket |
Related Products
-
Stainless Steel Ball Lock® Face Mount Receiver Bushings
£63.08 – £174.40 excl. VAT -
Ball Lock® Fast Acting Shanks
£88.16 – £138.72 excl. VAT -
Ball Lock® Dual Station Subplates
£2,236.80 – £2,264.00 excl. VAT -
Quick-Loc™ Alignment Tools
£1,440.00 – £1,472.00 excl. VAT
